Logical Volume In AIX A Primer

April 8th, 2009

Users can not access directly, the disk space available on Physical Volumes with in Volume Group. In order to access the space available, the users and applications need to access File Systems which are created on Logical Volumes. Therefore to manage Physical Volume space you need to manage Logical Volumes. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction.

Logical Volume Defined
Logical Volumes can be defined as the logical entities which are created from Logical Partitions. While creating Logical Volumes, the number of Logical Partitions are specified.

Mapping To Physical Partition
One Logical Partition maps exactly to one Physical Partitions. But if it’s the case of mirroring then one Logical Partition can map to two or three Physical Partitions as well.

Size of Logical Volume
The size of Logical Volume is determined by the following formula:
Size of LV = Size of LP * No. of LVs * No. of copies of LPs

Components of Logical Volume
Each of the Logical Volume has a Logical Volume Identifier(LVID). It is used to recognize the Logical Volume while using LVM libraries and certain low level commands. LVID format is: VGID.num. The num is the number used to represent the Logical Volume.

Contents of Logical Volume
Each of the Logical Volume contains Logical Volume Control Block. Its better known as LVCB. LVCB takes the first 512 Bytes of Logical Volume. All of the information about Logical Volume is contained there-in. The information is:

  1. Time of creation.
  2. Information about mirroring.
  3. Mount Point(If it has File System created on it.).

I’ll discuss the operations possible on Logical Volumes in some other post.

Tags: , , , , , , , , , , , ,
Posted in LVM | 2 Comments »

Comments

2 Responses to “Logical Volume In AIX A Primer”

  1. File Systems In AIX – A Primer | World is Welcome To The World of Unix!!! Says:

    […] talking, the File Systems are collection of files, directories etc. within a single partition or Logical Volume in a Volume Group. Collecting files and directories from different Logical Volumes or Partitions […]

  2. How To List Volume Groups and Their Characteristics | World is Welcome To The World of Unix!!! Says:

    […] LVs: Maximum number of Logical Volumes allowed in Volume […]

Leave a Reply

 Comment Form 

 



More articles from the category: LVM


The mkvg FAQs

Here in this post I’m presenting few things in the form of FAQs. The can be used as a ready reference while creating Volume Groups. To know how to create Volume Group read the article: How To Create Volume Group.

How To Create Volume Group

Lots of things need to be considered while creating Volume Groups. In this post I’m presenting various scenarios of Volume Group creation. In the previous post I introduced you to listing of Volume Groups. For the ones interested in fundamentals of Logical Volume Manager read the previous article: Aix Logical Volume Manager A Brief Introduction…

How To List Volume Groups and Their Characteristics

I introduced Volume Groups in one of my previous posts. In this post I’m going to discuss, how to carry out common operations on Volume Groups. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction.
Here are few things which I’m gonna discuss in this post:

Reorganize Volume Group What Is It And How To Do It?

What is reorganization of a Volume Group and why its needed, is a bit confusing for the system administrators. Here in this article I am explaining it to make it easier for the reader

How To Work With Physical Volumes

I’ve written in my previous posts about introduction to Physical Volumes. There I also discussed some operations to be carried out on Physical Volumes. Now, I’ll be discussing some other operations on Physical Volumes like listing Physical Volumes, Logical Volumes on Physical Volumes, Physical Partitions allocations etc. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction.

File Systems In AIX-A Primer

Generally talking, the File Systems are collection of files, directories etc. within a single partition or Logical Volume in a Volume Group. Collecting files and directories from different Logical Volumes or Partitions does not qualify to be named as File System. Aix supports mainly three types of File Systems: JFS, NFS and CDRFS. All these are being discussed here in this article. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction

Logical Volume In AIX A Primer

Users can not access directly, the disk space available on Physical Volumes with in Volume Group. In order to access the space available, the users and applications need to access File Systems which are created on Logical Volumes. Therefore to manage Physical Volume space you need to manage Logical Volumes. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction….

Volume Group In AIX – A Primer

Volume Group is at the highest level in LVM hierarchy. Hard disks are used as Physical Volumes in LVM. Then Physical partitions are mapped to Logical Partitions. Logical Partitions are combined to Logical Volumes. These Logical Volumes comprise the Volume Group. For more information you can see the previous article: Aix Logical Volume Manager A Brief Introduction..

How Does AIX Deal With Bad Blocks

The biggest concern for any organization using a server is data integrity. The various solutions like Network Attached Storage, Storage Area Networks, high availability servers, online data backup and disaster recovery solutions are among the available solutions.

AIX Logical Volume Manager A Brief Introduction

The storage in Aix can be divided in two layers: Physical and Logical.

On physical level the two things come into picture:

1. Physical Volume(PV).
2. Physical Partition(PP).

On logical level the storage is divided in three parts:

1. Logical Partition(LP).
2. Logical Volume(LV).
3. Volume Group(VG).

Physical Volume In AIX – A Primer

Physical Volume in AIX is a hard drive with special characteristics which are useful for LVM(Logical Volume Control). So, if any hard drive is to be used for LVM purpose, it needs to be made as Physical Volume. Physical Volume has several properties which differentiate it from normal hard drive. These are listed as below…

Non Concurrent, Concurrent and Enhanced Concurrent Volume Groups

Often the confusion arises among these types. I am trying to clarify the differences.The terms often apply in clustering scenario.

Non Concurrent VG
In Non Concurrent VG, application runs typically on a single node only and data of VG is accessible to that node only. If however present…

Quorum-What it is and Why is it Needed

The importance of Quorum concept lies in fact that if quorum is enabled and VGDAs fall below 51% then the data on VG may be corrupted if VG remains varied on. Thats why quorum enabled VG is varied off if quorum falls below 51%. This way data is safe on VG because disk